Unleaded Valve Seat Conversion

Because of CNC machining commitments we are now unable to undertake any engine work, these pages remain for information purposes only.  But – we will be happy to find someone to help with your job, please phone or e-mail if you need a recommendation.

Nephews & nieces in ChittyTo date we have fitted hard exhaust valve seat inserts to a huge range of cylinder heads and blocks. Dates of manufacture are from as early as 1920 to the late ‘80s, and have ranged from being completely straightforward, to blummin’ difficult. One of the most prestigious jobs completed so far was to a car with the registration number GEN11 – (click here  to read our Chitty Story).

This floor jack I bought yesterday uses uses dual pump mechanism to lift your car, and helps you save a great amount of $$ for repairing small car problems. Make sure your vehicle is parked on a flat concrete surface and that the conditions of the floor on which you will be using the jack stands is solid and free of debris.

Although the Unleaded issue may be old news, there are a surprising number of older cars that haven’t been converted, and some that simply don’t need doing.. More info can be found following these links –

Unleaded Overview

Processes and Risks

Frequently Asked Questions

These articles address the most obvious issues, while queries specific to individual types of design can be discussed by phone before the job is started. Please note – only a tiny amount of engines will
prove impossible to convert!

Volvo headOne of the most common questions about converting to Unleaded is whether or not the performance of the vehicle will suffer.  The answer to this is not particularly disappointing. Although Premium Unleaded has a lower Octane rating than 4 Star and so should prevent the engine from achieving the same power output, a freshly overhauled Unleaded head will be in improved condition and will redress the balance.

And don’t forget that we now have Shell Optimax & BP Ultimate – in our experience both are well worth the extra few pence per litre!
Ford V6 heads

Costs remain reasonable – e.g. a Ford X/Flow can be completely overhauled (& returned in as close to “new” condition as possible with new bronze valve guides, Unleaded 3 angle seats, all machining & assembly etc) for around £180.00.  The same job to a pair of 2.8 V6 Cologne heads is £270.00.