RAPID PROTOTYPING CNC MILLING FACILITY
We have invested in a brand new 3D CNC milling machine.  It's labelled as "Rapid Prototyping" because of the type of software used, its high spindle speed (up to 50,000rpm) and its method of "small & often" metal removal.  Our software has the ability to convert an on-screen image into a machining program, with tool paths, cutting speeds & feed rates calculated within a couple of minutes.

This machine is used for accurate repeat machining of engine components and other 3D profiling jobs, as well as simple jobs like one-off inlet & exhaust manifold adaptor plates (and inlet spacer plates if you're looking for that last bit of torque).  Machining your logo into a rocker cover or other components can be completed quickly & easily.  "Brag" plates to fit into an existing recess can be made from basic measurements & descriptions.  Trade enquiries are most welcome, and will be treated with complete confidentiality.

We're only interested in machining soft materials (aluminium alloys, copper etc), possible applications are combustion chambers, spark plug covers, supercharger mountings, thermostat housing base plates, inlet & exhaust manifold adaptor plates, just about any Copper Gasket you can think of... etc.

Now available - 3D CNC machining to Combustion Chambers.
If you're building a turbo conversion we can machine your combustion chamber for the correct compression ratio.  CVH Hemi, YB Cosworth, Ford 2.8V6, MGB & MG Midget heads can be done now, while others are under development.  This will be especially useful for turbo heads that have been heavily skimmed, and will save the engine builder from having to machine (& weaken) the pistons.  For more details speak to Mike Tanski (contact details here) for more details or click here.